GCarve › Router bits

Diablo (Freud) router bits

11 Diablo (Freud) router bits with diameter, flutes, cut length and shank, and the maker's chip load where it's published. In GCarve, add any of them from the Tool Library by part number: the feeds come with it, and the chip-load meter shows how hard you're pushing the bit.

Straight (6) · Ball nose (2) · Dovetail (1) · Keyhole (1) · V-bits (1)

Straight

Part	Name	Size	Flutes	Cut length	Shank
DR04108	1/4" Double Flute Straight Router Bit	0.25 in	2	1	0.25
DR04124	3/8" Double Flute Straight Router Bit	0.375 in	2	1	0.25
DR04132	1/2" Double Flute Straight Router Bit	0.5 in	2	1	0.25
DR12128	1/2" Double Flute Straight Router Bit	0.5 in	2	2	0.5
DR16100	1/2" Mortising Router Bit	0.5 in	2	0.5	0.25
DR16104	3/4" Mortising Router Bit	0.75 in	2	0.5	0.25

Ball nose

Part	Name	Size	Flutes	Cut length	Shank	Chip load
DR18106	3/16" Round Nose Router Bit	0.375 in	2	0.375	0.25
DR18112	3/8" Round Nose Router Bit	0.75 in	2	0.4375	0.25

Dovetail

Part	Name	Size	Flutes	Cut length	Shank	Chip load
DR22104	1/2" x 1/2" Dovetail Router Bit	0.5 in 28°	2	0.5	0.25

Keyhole

Part	Name	Size	Flutes	Cut length	Shank	Chip load
DR70104	25/64" Specialty Key Hole Bit	0.3906 in	2	0.4375	0.25

V-bits

Part	Name	Size	Flutes	Cut length	Shank	Chip load
DR20104	1/2" V Groove Router Bit	0.5 in 90°	2	0.4375	0.25

From Diablo (Freud)'s catalog. Always check the maker's current data before cutting.

Try it on your own job: GCarve is free and runs in your browser.

Create a free account