GCarve › Router bits
Jenny Bits router bits
16 Jenny Bits router bits with diameter, flutes, cut length and shank, and the maker's chip load where it's published.
In GCarve, add any of them from the Tool Library by part number: the feeds come with it, and the chip-load meter shows how hard you're pushing the bit.
Compression (4) · V-bits (3) · Ball nose (2) · Drills (2) · Up-cut end mills (2) · Tapered ball nose (2) · Bowl (1)
Compression
| Part | Name | Size | Flutes | Cut length | Shank | Chip load |
|---|
| 8675309-MJ | Mini Jenny 1/8 compression | 0.125 in | 2 | 0.75 | | |
| 8675309-J | The Jenny 1/4 compression (short up-cut) | 0.25 in | 2 | 1 | 0.25 | |
| 8675309-3/8J | The Jenny 3/8 compression (short up-cut) | 0.375 in | 2 | 1.125 | | |
| 8675309-1/2J | The Jenny 1/2 compression (short up-cut) | 0.5 in | 2 | 1.125 | | |
V-bits
| Part | Name | Size | Flutes | Cut length | Shank | Chip load |
|---|
| 30 GrooVee Jenny | GrooVee Jenny 30° down-shear V-bit 1/4 | 0.25 in 30° | 3 | 0.467 | 0.25 | 0.0009 |
| 8675309-V60 | GrooVee Jenny 60° down-shear V-bit 3/8 | 0.375 in 60° | 3 | 0.3 | 0.25 | 0.002 |
| 8675309-V90 | GrooVee Jenny 90° down-shear V-bit 3/8 | 0.375 in 90° | 3 | | 0.25 | 0.002 |
Ball nose
| Part | Name | Size | Flutes | Cut length | Shank | Chip load |
|---|
| 8675309-BB | The Big B 1/4 ball end mill | 0.25 in | 2 | 1.125 | 0.25 | 0.0024 |
| 8675309-KB | The KnottyB 3/8 ball end mill | 0.375 in | 2 | 1.5 | | |
Drills
| Part | Name | Size | Flutes | Cut length | Shank | Chip load |
|---|
| 8675309-MM | Mini Molly 1/8 drill mill (90° end) | 0.125 in 90° | 2 | 0.75 | 0.125 | |
| 8675309-M | Molly Mill 1/4 drill mill (90° end) | 0.25 in 90° | 2 | 1.032 | | |
Up-cut end mills
| Part | Name | Size | Flutes | Cut length | Shank | Chip load |
|---|
| 1/4 Extended Reach Upcut | 1/4 extended reach up-cut (relieved shank, 2 in reach) | 0.25 in | 2 | 1.5 | | 0.0031 |
| 8675309-UJ | Uptown Jenny 1/4 up-cut | 0.25 in | 2 | 1.125 | | 0.004 |
Tapered ball nose
| Part | Name | Size | Flutes | Cut length | Shank | Chip load |
|---|
| 8675309-SJ | Skinny Jenny 1/16 tapered ball nose | 0.0625 in | 3 | 1.125 | 0.25 | |
| 8675309-LB | The Little B 1/8 tapered ball nose | 0.125 in | 3 | 1.125 | 0.25 | 0.0018 |
Bowl
| Part | Name | Size | Flutes | Cut length | Shank | Chip load |
|---|
| Bowl-Cut Jenny | Bowl-Cut Jenny 1/2 bowl/tray bit | 0.5 in | 3 | 1 | 0.25 | |
From Jenny Bits's catalog. Always check the maker's current data before cutting.
GCarve