GCarve › Router bits

Sienci Labs router bits

13 Sienci Labs router bits with diameter, flutes, cut length and shank, and the maker's chip load where it's published. In GCarve, add any of them from the Tool Library by part number: the feeds come with it, and the chip-load meter shows how hard you're pushing the bit.

V-bits (3) · Ball nose (2) · Compression (2) · Down-cut end mills (2) · Tapered ball nose (2) · Up-cut end mills (1) · Surfacing / spoilboard bits (1)

V-bits

Part	Name	Size	Flutes	Cut length	Shank
ENDMILL30DV	30 Degree Engraving V-Bit Pack – 1/8" Shank-1F (4 or 10pcs)	3.175 mm 30°	1	11	3.175
ENDMILL60DV	15mm 60 Degree V-Bit – 1/4" Shank-2F	15 mm 60°	2	17	6.35
ENDMILL90DV	15mm 90 Degree V-Bit – 1/4" Shank-2F	15 mm 90°	2	12.7	6.35

Ball nose

Part	Name	Size	Flutes	Cut length	Shank	Chip load
ENDMILL14BU	1/4" Ball Nose Upcut End Mill – 1/4" Shank-2F	6.35 mm	2	25.4	6.35
ENDMILL026570	1/2"x1-1/4" Round Groove Bit – 1/4" Shank-2F	12.7 mm	2	12.7	6.35

Compression

Part	Name	Size	Flutes	Cut length	Shank	Chip load
ENDMILL029272	1/8" Flat Compression End Mill – 1/8" Shank-2F (2pcs)	3.175 mm	2	13	3.175
ENDMILL14FComp	1/4" Flat Compression End Mill – 1/4" Shank-2F	6.35 mm	2	25	6.35

Down-cut end mills

Part	Name	Size	Flutes	Cut length	Shank	Chip load
ENDMILL18FD	1/8" Flat Downcut End Mill Pack – 1/8" Shank-2F (3 or 10pcs)	3.175 mm	2	15	3.175
ENDMILL14FD	1/4"x1-1/4" Flat Downcut End Mill – 1/4" Shank-2F	6.35 mm	2	25.4	6.35

Tapered ball nose

Part	Name	Size	Flutes	Cut length	Shank	Chip load
ENDMILL18D05TB	1/8"xR0.25mm Tapered Ball Nose End Mill – 1/8" Shank-2F (2pcs)	0.5 mm 5.2°	2	15	3.175
ENDMILL14116TB	1/4"x1-1/2"xR1/32" Tapered Ball Nose End Mill – 1/4" Shank-2F	1.5875 mm 3.6°	2	38.1	6.35

Up-cut end mills

Part	Name	Size	Flutes	Cut length	Shank	Chip load
ENDMILL14FU	1/4" Flat Upcut End Mill-1/4" Shank-2F	6.35 mm	2	25.4	6.35

Surfacing / spoilboard bits

Part	Name	Size	Flutes	Cut length	Shank	Chip load
ENDMILL22mmSB	22mm Surfacing Bit – 1/4" Shank-2F	22 mm	2	12	6.35

From Sienci Labs's catalog. Always check the maker's current data before cutting.

Try it on your own job: GCarve is free and runs in your browser.

Create a free account